#pmieconf-rules 1
# --- DO NOT MODIFY THIS FILE --- see pmieconf(4)
# $Id: cisco.out_util.pmie,v 1.6 2000/08/17 05:57:26 mg Exp $
#

rule	cisco.out_util
	summary	= "$rule$"
	enumerate = hosts
	predicate =
"some_inst (
    100 * cisco.rate_out $hosts$ / cisco.bandwidth $hosts$
	> $threshold$
)"
	enabled	= no
	version	= 1
	help	=
"Some Cisco router interface exceeded threshold percent of its
peak bandwidth sending data during the last sample interval.
Use the command:
	$ pminfo -f cisco.bandwidth
to discover the list of Cisco router interfaces currently being
monitored by the Cisco PMDA - pmdacisco(1).";

string	rule
	default	= "Cisco router outbound bandwidth saturation"
	modify	= no
	display	= no;

percent	threshold
	default	= 90
	help	=
"Threshold percentage for Cisco router saturation, in the range 0
(idle) to 100 (operating at peak bandwidth)";

string	action_expand
	default	= %v%util[%i]@%h
	display	= no
	modify	= no;

string	email_expand
	default	= "host: %h Cisco router: %i outbound utilization: %v%"
	display	= no
	modify	= no;


# Configuration info specific to non-PCP tools follows...
# 

# for SGI Embedded Support Partner integration:
string	esp_type
	default	= "0x200094"
	display	= no
	modify	= no;

# for EnlightenDSM integration:
string	enln_test
	default = cisco.out_util
	display = no
	modify = no;
string	enln_units
	default = %util[%i]
	display = no
	modify = no;

# 
# --- DO NOT MODIFY THIS FILE --- see pmieconf(4)